MAYTAG Whole Home Water Filtration System Owners Manual MA1-5
November 2003
8
Model MWF4100AWS:
The
MAYTAG
Whole Home Water Filtration System and
MAYTAG
Whole Home Water Filtration System with Activated Carbon Prefilter
should only be installed where the System and the installation complies with state, provincial and local laws and regulations. The
MAYTAG
Whole Home Water Filtration System and
MAYTAG
Whole Home Water Filtration System with Activated Carbon Prefilter should only be used
to filter water that is cold. The
MAYTAG
Whole Home Water Filtration System and
MAYTAG
Whole Home Water Filtration System with
Activated Carbon Prefilter conforms with ANSI/NSF 42/53 for the specific performance claims as verified and substantiated by test data.
The
MAYTAG
Whole Home Water Filtration System must be installed by a
MAYTAG
Services Qualified Service Technician and properly maintained in
accordance with the Owner’s Manual. Failure to properly maintain the System will
compromise performance and/or result in a failure to control water quality.
The
MAYTAG
Whole Home Water Filtration System is not intended for the treatment
of water that has an obvious contamination source (such as sewage or wastewater).
Biofilm and pathogens in home piping systems could shed into water after it has been
filtered through the
MAYTAG
Whole Home Water Filtration System. Exposure to
microorganisms may also occur during daily activities.
System Tested and Certified by NSF International against
NSF/ANSI 42 and 53 for:
•
Cyst Reduction
•
Turbidity Reduction
•
Particulate Reduction - Class 1
•
Chlorine, Taste and Odour Reduction
Chlorine Reduction Capacity Rating:
396,000/105,000 (litres/gallons)
Do not use the MWF4100AWS, with activated carbon filter
option, with water that is microbiologically unsafe or of
unknown quality unless adequate disinfection before or after the
System. Models with activated carbon filter option certified for
cyst reduction may be used on disinfected waters that may
contain filterable cysts.