MAYTAG Whole Home Water Filtration System Owners Manual MA1-5
November 2003
4
Operational Safety
•
The MAYTAG Whole Home Water Filtration System is under pressure during use and
precautions must be taken.
•
This device is designed to operate on a 120VAC/15 Amp/ 60Hz line.
Do not
modify the plug
on the power cord. If the plug does not fit the electrical outlet, have a proper outlet installed
by a qualified electrician.
•
To avoid System damage: Ensure that a Stainless Steel Prefilter or Carbon Prefilter is in place
during operation of the System. In the absence of an Internal Prefilter, abrasive damage to the
System may occur. A damaged System may permit contaminated water to enter the household
distribution system causing illness. Irreversible and premature fouling of the System may also
occur resulting in System replacement at the owner’s expense.
Service and Maintenance Safety
•
To avoid electric shock: Disconnect the AC power from the
MAYTAG
Whole Home Water
Filtration System before servicing the controller; do
not
remove the controller cover while
System is in use. Only
MAYTAG
Services Qualified Service Technicians should attempt to
service the controller.
•
Important: The
MAYTAG
Whole Home Water Filtration System must be kept in a wetted
condition. Once installed or during service and maintenance activities, do not allow the
System to sit completely drained for extended periods (greater than 12 hours). Failure to do
so may damage the System and cause contaminated water to enter the household.
