MAYTAG Whole Home Water Filtration System Owners Manual MA1-5
November 2003
5
The
MAYTAG
Whole Home Water Filtration System must be kept wet at all times after
installation. Failure to do so may cause System to dry and become damaged, which may
lead to personal injury, and/or physical damage and
will void any warranty
.
Winter Storage
•
The
MAYTAG
Whole Home Water Filtration System will be damaged if frozen. The System
must be winterized according to the Winterization Procedure by a
MAYTAG
Services
Qualified Service Technician.
The
MAYTAG
Whole Home Water Filtration System must be winterized prior to
temperatures falling below 0°C (32 F). Failure to do so may cause System to dry, freeze
and become damaged, which may lead to personal injury, and/or physical damage and
will void any warranty
.
Other Safety Precautions
•
Do not plug in the Controller transformer if there is water on electrical wiring or the power
supply.
•
Always shut off water flow and release water pressure before cleaning or maintaining the
System.
•
The System is intended for indoor use only. The power supply and controller must not be
exposed to weather elements.
•
A
MAYTAG
Services Qualified Service Technician must perform an Integrity Test at least
once a year.
The
MAYTAG
Whole Home Water Filtration System must be;
•
tested annually using the integrity test.
•
operated with either a Carbon or Stainless Steel Prefilter.
Failure to do so may cause System to become damaged, which may lead to personal
injury, and/or physical damage and
will void any warranty
.
Emergency Bypass Safety (if installed where required by local plumbing codes)
Some Systems will have a bypass valve installed. If a bypass valve is installed, your System
piping will look like Photo 1. Follow these safety precautions if your System has been installed
with an emergency bypass valve.
