Maytag MGDE500WR - ADA Compliant, 7.2 Cu Ft Cap, User Manual

Page: 10 / 32

10
This chart shows examples of items that can be rack dried and the
suggested cycle, temperature setting and drying time. Actual drying
time will depend on the amount of moisture items hold.
Rack Dry Setting Temp. Time*
(Minutes)
Wool Sweaters
Block to shape and lay flat
on the drying rack.
Timed
Dry
Low 60
Stuffed toys or pillows
Cotton or polyester fiber
filled
Timed
Dry
Low 60
Stuffed toys or pillows
Foam rubber filled
Timed
Dry
Air Only
(no heat)
90
Sneakers or canvas shoes Timed
Dry
Air Only
(no heat)
90
*Reset time to complete drying, if needed.
NOTE: You must remove drying rack for normal tumbling. Do not
use Sensor cycles with the drying rack.
Optional Accessories
Pedestals
Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (254 mm) or 15.5" (394 mm) pedestal with
drawer. The pedestal will add to the total height of the dryer for a
total height of approximately 48" (1219 mm) or 53.5" (1359 mm),
respectively.
For a garage installation, you will need to place the 10" (254 mm)
pedestal at least 9" (229 mm) above the floor. You will need to place
the 15.5" (394 mm) pedestal at least 3.5" (89 mm) above the floor.
A B
A. 10" (254 mm) pedestal
B. 15.5" (394 mm) pedestal
The pedestals are available in several colors. To order, call the
dealer from whom you purchased your dryer or refer to the
“ Assistance or Service” section.
P
edestal Height Color Part Number
10" (254 mm) White MHP1000SQ
15.5" (394 mm) White XHP1550VW
15.5" (394 mm) Crimson XHP1550VF
15.5" (394 mm) Evergreen XHP1550VP
15.5" (394 mm) Oxide XHP1550VJ
Stack Kit
Are you planning to stack your washer and dryer? To do so, you will
need to purchase a Stack Kit. To order, call the dealer from whom
you purchased your dryer or refer to the
“ Assistance or Service”
section. Ask for Part Number 8212640.
Door Reversal Kit
Are you planing to reverse the door swing direction on your
PERFORMANCE SERIES dryer? To do so, you will need to purchase
a Door Reversal Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the
“ Assistance or Service” section. Ask for Part Number
W10200372.
Backguard
If you are installing your PERFORMANCE SERIES washer and dryer
and wish to avoid having loose items fall behind your machines,
you may purchase a pair of washer/dryer backguards. These will
reduce the chance of items falling behind the machines during
operation.
To order, call the dealer from whom you purchased your dryer or
refer to the “ Assistance or Service” section. Ask for Part Number
8558694 (White).
DRYER CARE
Cleaning the Dryer Location
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
Cleaning the Lint Screen
Every load cleaning
The lint screen is located in the door opening of the dryer. A screen
blocked by lint can increase drying time. Clean the lint screen before
each load.