9
CYCLE GUIDE — TIMED AND STEAM CYCLES
Any load
Timed Dry
High
40
Wrinkle Prevent
™
Use to dry items to a damp level for items that do
NOTE:
Select Air
Medium
not require an entire drying cycle. Select a drying
Dry to dry foam,
Low
temperature based on the type of fabrics in your
rubber, plastic,
Extra Low
load. If you are unsure of the temperature to select
or heat-sensitive
Air Dry
for a load, select the lower setting rather than the
fabrics.
higher setting.
Small loads and
Rapid Dry
High
27
Wrinkle Prevent
™
For small loads of 3-4 items.
sportswear
(Non-Steam
Medium
models only)
Low
Extra Low
Air Dry
Mixed Loads
Freshen Up
High
20
Wrinkle Prevent
™
Use to reduce wrinkles, including from loads left in
(Non-Steam
Medium
the dryer too long. Cycle run time may be manually
models only)
Low
adjusted, and Temperature is selectable.
Extra Low
Air Dry
Shirts, blouses,
Custom
Medium
15
Wrinkle Prevent
™
Use to reduce odors and light wrinkles.
and slacks
Refresh
NOTE:
Do not add dryer sheets.
(Steam
models only)
Mixed Loads
Auto Refresh
High
20
Wrinkle Prevent
™
Use to reduce wrinkles, including from loads left in
(Steam
Medium
the dryer too long. Cycle run time may be manually
models only)
adjusted, and Temperature is selectable.
NOTE:
Do not add dryer sheets.
Items to dry:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Settings and options shown in
bold
are default settings
for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Steam cycles (on some models) are designed for use
with dry loads to loosen wrinkles, reduce odors, and
refresh fabrics.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the
default time appears in the display.
Use the More Time/Less Time buttons
to increase or decrease the time in
1 minute increments. Press and
hold to change the time in 5 minute
increments.
The maximum dry time is 100 minutes.
Using Air Dry
Use the Air Dry temperature setting with Timed Cycles for items
that require drying without heat such as rubber, plastic, and
heat-sensitive fabrics. This chart shows examples of items that
can be dried using Air Dry.
When using Air Dry:
t $IFDLUIBUDPWFSJOHTBSFTFDVSFMZTUJUDIFE
t 4IBLFBOEþVGGQJMMPXTCZIBOEQFSJPEJDBMMZEVSJOHUIFDZDMF
t %SZJUFNDPNQMFUFMZ'PBNSVCCFSQJMMPXTBSFTMPXUPESZ
NOTE:
Air Dry setting is only available with Timed Cycles.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (Air Dry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE:
If you have questions about drying temperatures
for various loads, refer to the care label directions.
Type of Load
Est. Time*
(Minutes)
Foam rubber – pillows, padded bras,
20–30
stuffed toys
Plastic – shower curtains, tablecloths
20–30
Rubber-backed rugs
40–50
Olefin, polypropylene, sheer nylon
10–20
*Reset time to complete drying, if needed.
Steam model
Non-Steam model
Summary of Contents for MEDE201Y
Page 3: ...3...
