Maytag MAH6700AW Series, Service

Page: 41 / 68

©2006 Maytag Services
16026186 A-3
ELECTRICAL
Refer to serial plate for specific
electrical requirements. For
more detailed information refer
to section on
Electrical
Requirements .
WATER
Washer needs two standard
3/4 inch water supply faucets
with a pressure between
20–120 pounds per square inch.
For more detailed information
refer to section on
Water
Requirements .
PARTS supplied for installation:
Cable tie to secure drain hose to standpipe, inlet hose or laundry tub
• Multi wrench
• Utility knife
• Channel lock
• Level
READ THIS BEFORE YOU START…
Tools needed for installation:
CABINET DIMENSIONS
Note:
The height of the washer from top to floor is 38" this includes the leveling leg screwed all the way in. The customer can
unscrew the leg out an additional 7\8" for a total overall height of 38 7\8".
Hose guide Bolt hole covers Wrench
A
C
B
D
9700/8700 series INCH(CM)
A. Height-Overall 38” (96.5)
B. Width 27” (68.6)
C. Depth-With Washer Door Open 90 50-7/8” (129.2)
Degrees
D. Depth 30-3/4” (78.1)
6700 series INCH(CM)
A. Height-Overall 38” (96.5)
B. Width 27” (68.6)
C. Depth-With Washer Door Open 90 49” (124.5)
Degrees
D. Depth 28” (71.0)