Page 6/43
Operating Instructions USi
281114 v1.3
Polymer Electric
Safety instructions
Applicable Standards
The type model of the product conforms to the EMC Directive 2004/108/EC.
Applicable standards:
r
IEC
60947-5-2 „IEC?60947-5-2 “Low-Voltage Switchgear and Controlgear –
Part 5-2: Control Circuit Devices and Switching Elements – Proximity Switches”
r
IEC 60204-1 “Safety of Machinery – Electrical Equipment of Machinery; Part
1:General Requirements”
These Operating Instructions were drawn up in compliance with IEC 62079 “Prepa-
ration of Instructions – Structuring, Content and Presentation”.
Ä
In the event of a fault, take out of operation
In the event of malfunctions and visible damage, take the Control Unit out of
operation.
Ä
Do not overload Evaluation Unit
Ensure that the speci
fi
ed switching current is not exceeded.
Ä
Observe PIN assignment
Observe the PIN assignment when connecting the supply voltage.
Ä
Do not alter special cable
The special cable on the sensor (ultrasonic transducer) has a
fi
xed length.
Never shorten, lengthen or alter the special cable.