281114 v1.3
Operating Instructions USi
Page 27/43
Polymer Electric
Adjust settings
The green LED “Power”
fl
ashes for 5
s slowly (1
Hz), then the yellow LEDs “OUT”
are lit continuously for 2
s. Subsequently, the green LED “Power”
fl
ashes slowly
(1 Hz).
4. Now release the “Teach In” button.
Now all the LEDs are lit alternately from the top to the bottom in the manner of a
chaser light. The USi expects your con
fi
rmation for the RESET within 10 s.
Note:
If the “Teach
In” button is not pressed, the USi will automatically cancel the
function “RESET” after a period of 10 s.
5. Press the “Teach In” button > 0.5 s.
The USi signalises that the RESET is executed by fast
fl
ashing (5 Hz) the green
LED “Power” for 1 s and then brie
fl
y lighting up all LEDs “OUT”.
Adjust Settings with Software (optional)
The settings can be easily changed
with the parameter assignment
software: Select the option with the
mouse, directly enter the switch points
with the keyboard and transfer all set-
tings in the USi with one mouse click.
The parameter assignment software
(7502768) is supplied on a USB
fl
ash.