Maycom N-Trans Pro User Manual Download Page 5

Page: 5 / 26

N>Trans Manual - Maycom Audio Systems – Page 5

Unpacking

Please unpack the N>Trans and check whether you received:

•

N>Trans or N>Trans Pro

•

CD-Rom with drivers, configuration program, manual and demo software.

Note:

To save on additional packaging, ordered optional accessories may be packed within the box.

If you ordered your N>Trans with bundled software, check that you received the keycode label.
Example:

You need this code to activate the Luci Recording and Editing Software.

Available Accessories

Article Number

Description

Comment

36500250

Mono cable for N>Trans Standard

3.5mm jack to 3pin XLR

36500251

Mono cable for N>Trans Pro

5 pin Lemo to 3pin XLR

36500252

Stereo cable for N>Trans Pro (5pin)

5 pin Lemo to 5pin XPLR

36500253

Stereo cable for N>Trans Pro (Dual)

5 pin Lemo to dual 3pin XLR

10205287-A01

CF Type II to PC Card (PCMCIA) adapter

Required for most Laptops with PC-
Card slots.

10208201-A01

Luci - PDA Application *

Mono Recording and Editing Software *

10208201-B01

Luci Edit - PDA Application *

Stereo Recording and Editing Software
plus non-destructive editing and more *

For more information or a quotation please contact your dealer or the sales department of Maycom: e-mail

[email protected]

or visit

www.maycom.nl

For rugged PDA solutions please contact Maycom.
When ordering additional accessories please specify the article number.

* For more detail regarding the Luci software, please see

www.luci.eu

Luci Keycode

request ID:

123456789

www.luci.eu

IMPORTANT NOTE:

Keep this label at a save place.
You might need it again upon reinstalling the software

Summary of Contents for N-Trans Pro



























Search results

Summary of Contents for N-Trans Pro

Reviews:

Related manuals for N-Trans Pro

Brands by name

Popular brands

Maycom N-Trans Pro, User Manual

Search results

Summary of Contents for N-Trans Pro

Reviews:

Related manuals for N-Trans Pro

Brands by name

Popular brands