M16 socket head screw, 4x
M 10 socket head screw, 4x
strong cardboard
risk of scratching
2. Loosen the M16 screws of the anchor foot plate.
3. Tilt the upper anchor foot until it is in a horizontal position.
4. Loosen the four M10 socket head screws of the upper anchor foot until there is sufficient clearance
inside the anchor foot for the centre pole to be inserted horizontally.
5. Put a piece of thin, strong cardboard (400x300mm, max. 2mm thick) into the upper anchor foot to
protect the powder coating of the base mast from scratches during insertion.
page 4 of 22 Deutsch /
English
/ Français
Stand 38-1408
