If the crank / drill bit is not fully inserted, it will wear.
• Always insert the crank / drill bit right up to the limit stop.
• During cranking always also push a bit to make sure the crank / drill bit stays right up to the
limit stop.
3. Fully open the parasol (c.f. illustration) in clockwise direction, until the two upper plastic rings touch
each other. Or open the parasol with the integrated tabular motor, see “operating manual tabular
motor”.
A falling parasol can cause serious or even fatal injury.
If the parasol is not firmly anchored in the anchor foot, it may be lifted by the wind.
• Make sure all screws of the anchor foot are tightened firmly.
The parasol can be damaged if it is opened with a drilling machine.
When opening a parasol with a drill, driving too close to the limit stop may damage the operating
mechanism.
• Always use the crank for the last few turns up to the stop, not the drill.
• Please only use drills with integrated safety clutch. Always set the safety clutch to the lowest
level, this reduces the damage in case the drill would hit the limit stop.
Caution
Danger
Caution
plastic rings
plastic ring
plastic ring
Stand 38-1408 Deutsch /
English
/ Français
page 11 of 22
