6. The fifth person brings the upper anchor foot into horizontal position. The axis of the centre pole and
of the upper anchor foot should be aligned to make sure they will not cant during connecting.
7. Plug the parasol into the upper anchor foot. If the parasol is with electric power, the fifth person must
pull the electric cable trough the bore hole at the upper tubing at the same time.
8. Put the parasol into the MAY setup aid (if purchased, art. no. 352040) or onto a chair.
Laying down the parasol may damage the canopy.
Avoid point loads when laying the parasol down as the tare weight can cause cuts or abrasions
at the canopy.
• The support points must be softly padded with a cushioned contact layer.
9. Remove the cardboard from the upper anchor foot.
10. Tighten the four M10 screws of the upper anchor tube.
A falling parasol can cause serious or even fatal injury.
If, during assembly, the parasol spins round in the anchor tube, it may become uncontrollable,
fall and thus cause a serious accident.
• Tighten the four M10 socket head screws with a torque of 30 Nm.
Caution
Danger
MAY setup aid
Stand 38-1408 Deutsch /
English
/ Français
page 7 of 22
