27
ENG
Care, cleaning & maintenance
Cleaning:
Clean the training device each time after training with a damp cloth to remove any sweat and or liquids. Do not use sol-
vents. Dry off the cleaned areas thoroughly.
Regular cleaning helps to keep your device in good condition and therefore also significantly contributes to the length of its
service life.
The costs of repairing a training device which has not been properly maintained will not be covered in any way by the war-
ranty.
Also clean the traction cables regularly.
Cleaning and Lubricating the Chrome Guide Pipes
The barbell bar guide pipes must also be cleaned and lubricated regularly to guarantee optimum smooth running. To
achieve this clean the guide pipes with a damp cloth and some liquid soap or washing up liquid. Alternatively, you can use
the MAXXUS® degreaser spray (optionally available). After this, dry the guide pipes off thoroughly and lubricate them with
MAXXUS® lubricant spray (optionally available) leaving a thin film on the surface.
With regular use you should lubricate the guide pipes once a month. If squeaking noises occur during training the pipes
require lubricating immediately. MAXXUS® degreaser and lubricating sprays are available from our Online Shop at www.
maxxus.de or from our Showrooms in Groß-Gerau.
Maintenance
Checking the Fixing Materials
At least 1 x Monthly you must check that the screws and nuts are tightened securely and tighten them if necessary.
This device is recyclable. At the end of its service life you must dispose of it properly. Do not dispose the device in the normal house-
hold rubbish.
Dispose the device at a communal waste disposal facility or at a registered waste disposal company.
Observe current regulations which apply accordingly. If in doubt seek advice from your local government office or county council as to
where you can dispose of the device properly and in an environmentally sound manner.
These accessories are best suited for use with your training device. All products are
available from our online shop at www.iconic.com or direct from our showroom.
MAXXUS® Floor Protection Mats
Due to its extreme density and material thickness of 0.5 cm and 1.2 cm, these
mats provide perfect protection for floors and floor coverings against damaging,
scratches and soiling through body sweat. Noise caused by running and move-
ment is significantly reduced.
Available in the following sizes:
−
160 x 90 cm – thickness 0.5 cm
−
210 x 100 cm – thickness 0.5 cm
−
100 x 100 cm - thickness 1.2 cm
MAXXUS® Degreaser Spray
- Optimum cleaner for cleaning off dirt and maintaining the
guide pipes and roller surfaces.
MAXXUS® Lubricating Spray
– Optimum lubrication for guide pipes.
MAXXUS® Anti-Static Spray
– Effective against the static charges created in frames,
clothing and training computers. Devices which are located on carpets or synthetic floors
will become statically charged. MAXXUS ® Anti-Static Spray will deter this.
Synthetic surfaces treated with MAXXUS® Anti-Static Spray do not attract dust as quick
-
ly and will remain clean for longer.
MAXXUS® Special Foam Cleaner
– Use for regular cleaning of your training device.
Plastic covers and metal frames can be easily cleaned and perfectly maintained with
MAXXUS ® Special Foam Cleaner. It is also suitable for cleaning pulse belts and other
training accessories.
Disposal
Recommended Accessories
Summary of Contents for Multipress 9.1
