5
ENG
Power Cable
Only use the power cable included in delivery to operate your training device. First,
attach the connector on the power cable to the connection at the back of the device.
Only then connect the mains plug on the power cable to the electrical supply socket. If
you want to remove the power cable from your device, first pull the mains plug out of the
electrical socket before disconnecting the power cable from the device.
CAUTION
Only connect your training device to grounded electrical socket installed by qualified
electrician. Do not plug this device into a power strip or cable reel.
Mains Switch
After connecting the power cable correctly, you can switch your device on and off at the
main switch.
To switch on the device, press the switch into position “I”.
To switch off the device, press the switch into position “0”.
At one end of the training belts is a handle and on the other end is a carabiner hook.
On the bottom at the back of the vibration plate there are two brackets with eyelets. To
attach the training belts to the vibration plate, lift the device far enough up at the back
so you can pull out the two brackets. With the carabiner hook attach one training belt to
each bracket on either side of the device.
Please remove the training belts and fold-in the brackets if the belts are not in use.
MAXXUS® Vibration Plate - Floor Protection Mat
Due to its extreme density and material thickness of 1.2cm, this mat optimally dampens
the vibrations and noise of the vibration plate during training. In addition, it also provides
perfect protection for floors and floor coverings against damaging, scratches and soiling
through body sweat.
Dimensions: 100 x 100 cm
Mains Connection
Attaching the Training Belts
Recommended Accessories
Overall View of the Device
Main Switch
Mains Cable Connector
Bracket with Eyelet
Bracket with Eyelet
Summary of Contents for Lifeplate 2.0
Page 1: ...2 0 ENG User Guide...
