3
9
A01
A02
A
16
7
ENG
Step 3: Assemble the Handlebar Stem
Connect the terminals of the three cables that protrude from the bottom of the handlebar stem (A02) to the
terminals of the three cables that protrude from the base frame (A01).
Then fix the handlebar stem (A02) to the main frame (A01) using four hexagonal screws M8x20 (9)
WARNING:
Make sure that the cables do not get pinched or damaged when you are assembling the handlebar stem.
Step 4: Assembling the Fixed Handlebars
Pass the cable protruding out of the handlebar stem (A02) through the opening in the cockpit holding bracket on
the fixed handlebars (A16).
Then attach the fixed handlebars (A16) to the top end of the handlebar stem (A02) using two Allen screws
M8x25 (3).
WARNING:
Make sure that the cables do not get pinched or damaged when you are assembling the fixed handlebars.
Assembly
