A
A02
0
16
A
A02
0
16
11
ENG
Step 10: Assembling the Bottle Holder
Loosen and remove the two screws M5 (B05) which are preas-
sembled on the handlebar stem (A02). Attach the bottle holder
(C27) to the handlebar stem (A02) with the two screws M5 (B17)
Step 11: Assembling the Cockpit
Loosen and remove the four pan head screws (B17) preassem-
bled on the back of the cockpit. Connect the cables protruding
from the cockpit (D02) with the cables that protrude from the fixed
handlebars. Please note that the two cables of the hand pulse
sensors have identical connections. The order of connection is
not important here. The other two cables can be easily identified
by their connections.
Now secure the cockpit (D02) to the cockpit bracket on the fixed
handlebars (A16) using the screws (B17).
WARNING:
Make sure that you do not pinch or damage the
cables during assembly.
Assembly
Transport, Location and Storage
Transport
In order to transport your training device simply and safely, the front stand is equipped with transport rollers. To
transport the exerciser, stand at the rear end of the glide frame and grasp the rear cross tube with both hands.
Now tip the training device upwards until the main weight of the training device rests on the transport rollers.
Now you can simply push the device on the transport rollers into the required position. Always make sure that
you have a firm and secure footing when lifting, transporting and putting down the device.
Transport rollers
Safety Distance
Choose training area which allows you free space on all sides and the greatest possible security.
The safety area should always be at least 100 cm to each side, and 100 cm behind and in front of the training
device.
Location and Storage
This training device was designed for use in dry, warm indoor areas. It is not to be used or stored in damp or wet
areas such as saunas, swimming pools, etc. or in outdoor areas, such as balconies, terraces, gardens, garag-
es, etc. Due to the high humidity or low temperatures possible in any of these areas, damage may occur to the
electronics or corrosion and rust defects may arise. No warranty claims for damage of this kind will be accepted.
Please choose a warm, dry, level location for your training equipment both for when in operation and in storage.
For your own comfort, make sure that the training area is sufficiently ventilated during exercise to allow optimal
oxygenation. Before using your training device after a long period of non-use, make sure that all fastenings are
secure.