Maxx 20569 User Manual Download

Page: 7 / 134

3. INSTALLEREN VAN ZAAGBLAD EN ZAAGKETTING

Een standaardzaagpakket bevat de items zoals afgebeeld.

(1) Motorunit

(2) Geleider

(3) Zaagketting

(4) Steeksleutel

Open de doos en installeer het zaagblad en de zaagketting als volgt op de motorunit:

De zaagketting heeft zeer scherpe randen. Gebruik dikke beschermende handschoenen

voor de veiligheid.

1. Trek de beschermkap naar de voorste handgreep om te

controleren of de kettingrem niet is ingeschakeld.

2. Draai de moeren los en verwijder het kettingdeksel.

3. Breng de ketting op het tandwiel en monteer de

zaagketting rond de geleidestang en monteer de

geleidestang op het aggregaat. Stel de positie van de

kettingspannermoer op het kettingdeksel af op het

onderste gat van de geleider.

(1) Opening

(2) Bewegingsrichting

(3) Kettingspanner moer

4. Breng het kettingdeksel aan op het motorblok en draai de moeren vast met de vingers.

3. Installing Guide Bar and saw Chain

A stand saw unit package contains the items as illustrated.

(1) Power unit

(2) Guide bar

(3) Saw chain

(4) Plug wrench

Open the box and install the guide bar and the saw chain on the power unit as follows:

Pull the guard towards the front handle to check that the

chain brake is not engaged.

Loosen the nuts and remove the chain cover.

Gear the chain to the sprocket and, while fitting the saw

chain around the guide bar, mount the guide bar to power unit .

Adjust the position of chain tensioner nut on the chain cover to

the lower hole of guide bar.

(1) Hole

(2) Moving direction

(3) Chain tensioner nut

Fit the chain cover to the power unit and fasten the nuts to finger tightness.

The saw chain haw very sharp edges. Use

thick protective gloves for safety.

3. Installing Guide Bar and saw Chain

A stand saw unit package contains the items as illustrated.

(1) Power unit

(2) Guide bar

(3) Saw chain

(4) Plug wrench

Open the box and install the guide bar and the saw chain on the power unit as follows:

Pull the guard towards the front handle to check that the

chain brake is not engaged.

Loosen the nuts and remove the chain cover.

Gear the chain to the sprocket and, while fitting the saw

chain around the guide bar, mount the guide bar to power unit .

Adjust the position of chain tensioner nut on the chain cover to

the lower hole of guide bar.

(1) Hole

(2) Moving direction

(3) Chain tensioner nut

Fit the chain cover to the power unit and fasten the nuts to finger tightness.

The saw chain haw very sharp edges. Use

thick protective gloves for safety.

Summary of Contents for 20569







































































































































Search results

Summary of Contents for 20569

Reviews:

Related manuals for 20569

Brands by name

Popular brands

Maxx 20569, User Manual

Search results

Summary of Contents for 20569

Reviews:

Related manuals for 20569

Brands by name

Popular brands