19
4.2
BAND BRAKE MAINTENANCE
The frequency of brake lining renewal will depend
entirely on its usage. Should visual inspection reveal
that the lining thickness has worn to below 2mm or if
the ends of brake band can touch each other when
tight, then it is necessary to renew the brake lining.
Grease the band brake lead screw at least every
three months.
Avoid grease contamination of brake friction linings.
4.3
RECOMMENDED LUBRICANTS
Greases
- Lithium complex base NLG1 consistency No. 2
CASTROL
LMX
DUCKHAMS
Keenol
FINA
CERAN WR 2
SHELL
Retinex LX
MOBIL
Mobilgrease HP
Gearbox Oils
- ISO 3448 VG 320
CASTROL
Alpha MAX 320
SHELL
Tivela Oil
MOBIL
Mobilgear 632
BP MACH
GR XP 320
Quantity-
AC, DC and Hydraulic drives : 0.9 litres
Anti-Corrosive Coatings
CRC 3013 Soft Seal
Boeshield T9
Lanocote
Anti-Seize Coating
International Paints
Res-Q-Steel
Never mix greases, use only one type. If in doubt,
remove the previous lubricant and clean the parts
thoroughly before applying the new one.
!
Use synthetic oils only. Never mix two oils,
even if they are from the same manufacturer.
Summary of Contents for VWC 4000 Series
