![background image](http://html1.mh-extra.com/html/maxwell/vwc-4000-series/vwc-4000-series_manual_1746472024.webp)
22
The anchor does not free fall.
The clutch cones are not greased.
Disassemble the cones (9), clean and
grease them as described in Section
2.4.
The clutch is not fully disengaged.
Disengage the clutch fully.
The band brake is not disengaged.
Disengage the band brake fully.
Disc springs (10) not fitted.
Fit disc springs as described in 2.4.
Pawl (28) engaged.
Disengage pawl.
Chain jumps / slips on the
chainwheel.
The chainwheel not selected
correctly.
Contact Maxwell with correct
identification of the chain used on
board.
Chain twisted between windlass and
bow roller.
Untwist the chain.
Vertical angle of incoming chain
bigger than 2 degrees (see Picture
2.1).
Check the installation. If the problem
persists, some height adjustments
might have to be made.
Summary of Contents for VWC 4000 Series
