Maxwell Volcan MGBWA0100, Owner'S Manual

Page: 18 / 25

The circulation pump head and flow should
match the boiler system
The whole system should be clean,with no
sediment, rust, leakage, and drip-drop.
While affusing and refilling water. a water-
purification must be equipped.
Don't install the boiler to the place close to any
combustible material.
The wall on which the boiler is installed must be
able to support a hang weight of 45KG,and if it's
made of combustive materials,it should be
covered with anti-combustive at least 3 mm thick.
Never install the boiler in places where
combustion and volatile drugs are stored or used.
Don't install the boiler under any dangerous shelf
staff that maybe drop.
Don't install the boiler above other gas
applications.
The outlet of the flue gas pipe shall be installed at
places with good ventilation.
For natural gas and LPG users, D15 gas pipe can
be used. However we advise you use D20
pipe,the reducer pipe connecting with the gas
meter should less than D15.
Keep a stable voltage of 110V,Use constant
voltage regulator.
It is forbidden to use hemp thread for connecting
pipe. Use coarse plastic tapes. If hemp thread has
to be used in certain conditions,please
completely clean the pipes with compressed air
at 8 bar pressure.
Radiator of 150 square meter might be installed
in your room—you have to install the Y-shape
filter in the return water of heating system.
The outlet of safety valve must be connected to
floor drainage, there shall not be any valve on
connection pipe.
For system with cast iron radiators,please
completely clean the pipes and radiators with
high-pressure water or compressed air at 8 bar
pressure.In areas where water quality is
poor,please clean the system several times. Use
softened water for affusion of system.