Maxwell Volcan MGBWA0100, Owner'S Manual

Page: 11 / 25

You should keep all the parts of the boiler running
and the power supply on Sumer/winter
button.When the water temperature is below 8
centigrade,the burner and pump will start until the
temperature rises to 30 centigrade.To avoid the
boiler keep running around the clock, or laying
idle,please exhaust the air or add anti-freezing.
Exhaust the water in the pipeline of heating
system.Refilling water disposed,which can reduce
the water hardness and avoid the sediment
incrustration.
Use web and neutral soap to clean the boiler
shell. Never use abrasive detergent and
putty-powder.
Please follow the below instruction
Check the air-tightness.First check the
air-tightness when the gas valve is closed,then
open it, here should no gas through on the timer
display within 10 minutes
Check if the gas type is in accordance with the
required ones.
Check the connecting,L-N polarity and grounding
when connected to the 110V/60Hz power supply.
Ignite the gas and check the ignition.
Check the dates of Max. Gas flow,medium Gas
flow and Min. Gas flow and relative air pressure
to see if it's accordance with listed dates.
Check the intervening progress and intervening
time of safety equipment when there is no gas
supply.
Check the switches in and outside or control
display.
Check if there is any jam in the air inlet and outlet.
Seal the adjustment equipment of gas
valve(when the adjustment is finished).
Check the water flow of domestic hot water.
Check the airproof of all water pipe.
Check the ventilation of the installation place to
make sure it can satify the requirement.
Caution:
You can only use the boiler when the check is
accomplished, f any of the item above cannot be
matched,please call the technician.