![background image](http://html.mh-extra.com/html/maxwell/mw-3290/mw-3290_manual-instruction_1746540021.webp)
21
ENGLISH
№
Malfunction
Possible causes
Solution
2 The vacuum cleaner
gives alarms, periodical-
ly switches on and off.
It is possible that foreign objects
(wires, threads, hanging curtains,
etc.) have been wound onto the
driving wheels of the vacuum
cleaner.
Remove the foreign objects from the
driving wheels and from the floor.
3 The vacuum cleaner fin-
ishes cleaning ahead of
time and spontaneously
returns to the charging
station.
If the battery charge is too low for
the room cleaning, the vacuum
cleaner automatically return to
the charging station.
It is normal.
Do not interfere with the vacuum clean-
er operation.
4 The vacuum cleaner fin-
ishes cleaning ahead of
time and spontaneously
returns to the charging
station.
The operation time of the vacuum
cleaner depends on the cleaning
area, floor surface, room configu-
ration and the selected cleaning
mode.
It is normal.
Do not interfere with the vacuum clean-
er operation.
5 The vacuum cleaner
doesn‘t see obstacles
Anti-drop sensors are dirty.
Turn the vacuum cleaner over and wipe
the anti-drop sensors.
The sensors on the front bumper
are dirty.
Wipe the front bumper.
6 The vacuum cleaner
doesn‘t respond to the
remote control.
The batteries in the remote con-
trol are discharged and have to be
replaced.
Remove the old batteries and install
new ones strictly following the polarity.
The vacuum cleaner is switched
off or the battery is discharged.
Make sure that the battery is fully
charged and the vacuum cleaner is
switched on.
If the methods above do not solve the problem, perform the following actions:
1.
Switch the power switch off and restart the vacuum cleaner;
2.
If you cannot solve the problem after restarting the robot, apply to the customer support.
DELIVERY SET
Robotic vacuum cleaner – 1 pc.
Charging station – 1 pc.
Power adapter – 1 pc.
Side brushes – 4 pc.
Remote control – 1 pc.
Wet floor cleaning attachment – 1 pc.
Microfiber cloth – 2 pcs.
Cleaning brush – 1 pc.
Manual Tuya Smart APP – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Vacuum cleaner
Power supply: Rechargeable battery -
Li-Ion 14,8 V 2600 mAh
Battery charging time: 3-5 hours
Operation time: up to 2 hours
Power: 28 W
Suction power: 1200 PA
Dust bin capacity: 0,45 L
Water tank container: 0,2 L
Noise level: 68 dB
Power adapter:
Power supply: 100-240 V ~ 50/60 Hz 0,5 A
Output voltage: 19 V
0.8 A
Charging station:
Input voltage: 19 V
0.8 A
Output voltage: 19 V
0.8 A
Remote control:
Power supply: 3 V, 2 «ААА» batteries, 2х1,5 V
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not discard
the unit and the batteries with usual household
waste after the service life expiration; apply to
specialized centers for further recycling.
IM MW-3290.indd 21
11/26/20 3:34 PM