![background image](http://html.mh-extra.com/html/maxwell/mw-3290/mw-3290_manual-instruction_1746540016.webp)
16
ENGLISH
•
On/Off button «
» press this button to switch
the automatic cleaning on or off
Control panel illumination (18)
Depending on the unit condition, the LED elements of
the illumination can flash, glow constantly or «circle».
–
When the power is switched on, the illumination
elements will be «circling» and after 3 rounds
they will start glowing constantly.
–
During the vacuum cleaner operation the illumi-
nation elements glow constantly.
–
During charging the illumination elements «cir-
cle» constantly.
–
During the pause the illumination elements flash
slowly.
–
When the Wi-Fi is set, the illumination flashes
quickly indicating that the robot is in the con-
nection mode.
–
When the Wi-Fi is set, the illumination glows con-
stantly indicating that the robot is in the connec-
tion net mode.
Switching the vacuum cleaner on
•
Switch the vacuum cleaner on, setting the power
switch (2) to the position «I».
•
You will hear sound signals, the unit indicator
(18) will glow green and the vacuum cleaner will
switch to the standby mode.
Automatic room cleaning mode
•
Press the on/off button (17) «
», you will hear a
sound signal, the vacuum cleaner will switch on
and start cleaning in the automatic mode.
•
Press the on/off button (17) «
» to pause the
vacuum cleaner.
Automatic charging
•
When the remaining battery charge is less than
10%, you will hear a sound signal and the vac-
uum cleaner will automatically return to the
charging station.
•
You can send the vacuum cleaner to the charg-
ing station manually by pressing the button (15)
«HOME» «
».
Note: For correct operation of the automatic charg-
ing function place the charging station in direct view
of the vacuum cleaner.
Switching the vacuum cleaner off
•
Switch the vacuum cleaner off, setting the power
switch (3) to the position «0».
•
The control panel illumination (18) will go out.
Using the RC
•
Standby mode button (30) «
»
–
Press this button in the operating mode or dur-
ing charging, and the vacuum cleaner will stop
cleaning and switch to the standby mode.
•
Button (31) «
»
–
Press this button in the standby mode, pause or
operating mode, and the robot will automatically
start searching for the charging station.
•
Pause mode button (32) «
»
–
Press this button in the operating mode or dur-
ing charging, and the robot will stop cleaning
and switch to the pause mode;
•
Vacuum cleaner manual operation buttons (33)
«
»
- press this button, and the robot will move
forward.
- press this button, and the robot will move
forward.
IM MW-3290.indd 16
11/26/20 3:34 PM