Maxwell MW- 3241 GY, Instruction Manual

Page: 9 / 36

ENGLISH
9
–
Clean the dustbin (1) from dust and wipe it
with a soft damp cloth.
–
Remove the mesh filter (2) by turning it in
the direction of «UNLOCK» arrow. Clean the
mesh filter (2)
–
Clean the filter (3) from dirt and dust.
–
You can wash the filter (3) and the mesh filter
(2) under a warm water jet; before install-
ing the filters (2 and 3) make sure that they
are dry.
Notes:
– Do not wash the filters (2 and 3) in a dish
washing machine.
– Dry the filter (3) and the mesh filter 2) thor-
oughly before installing them.
– Do not dry the filters (2 and 3) with a hairdryer.
Assembling of the dustbin (1)
Note:
- Dry the filters (2, 3) and the dustbin (1)
thoroughly before assembling the dustbin.
–
Install the mesh filter (2) into the filter (3) and
turn it in the direction of «LOCK» arrow.
–
Install the filters (2, 3) into the dustbin (1).
–
Install the dustbin (1) into the vacuum clean-
er body, if the dustbin is assembled properly,
you’ll hear the click of release button (4).
Cleaning of the body
–
Wipe the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
–
Unplug the base before cleaning it.
–
Clean the base (9) with a slightly damp soft
cloth and then wipe it dry.
–
Do not immerse the vacuum cleaner body,
the base, the power cord and the power plug
of the base (9) into water or other liquids.
Provide that no water gets inside the vacuum
cleaner body and the base (9).
–
Do not use solvents or abrasives for cleaning
the vacuum cleaner and the base surfaces.
–
Do not wash the dustbin (1) and the filters (2,
3) in a dishwashing machine.
–
Do not dry filters (2, 3) with a hairdryer.
Storage
–
Before taking the vacuum cleaner away for
storage clean its body, the base (9), the dust-
bin (1), the filters (2, 3) and fully charge the
battery.
–
During long storage of the vacuum clean-
er charge the battery every two or three
months.
–
Keep the vacuum cleaner away from children
in a dry cool place.
Delivery set
1.
Vacuum cleaner – 1 pc.
2.
Base – 1 pc.
3.
Dust brush – 1pc.
4.
Crevice nozzle – 1 pc.
5.
Fastening (dowels 2 pcs, screws 2 pcs)
6.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Battery: Ni-Mh 1300 mA/h ~ 7,2 V
Power consumption: 60 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
MW-3241.indd 9 19.11.2013 10:56:44