Maxwell MW-3035 VT, Manual Instruction

Page: 14 / 54

14
ENGLISH
•
Set the continuous steam supply knob (3)
to the position « » (steam supply is off).
•
Fill the water tank (12) till the “max” mark
(13).
•
Place the iron on its base (9).
•
Insert the power plug into the mains sock-
et.
•
Set the control knob (10) to the maximum
soleplate temperature («MAX»), the pilot
lamp (7) will light up.
•
When the iron soleplate (14) reaches the
set temperature, the pilot lamp (7) will go
out and you can start cleaning the steam
chamber.
•
Unplug the unit.
•
Hold the iron above the sink horizontally,
press and hold the self-clean button (11).
•
Boiling water and steam with scale will be
intensively released from the soleplate (14)
openings.
•
Slightly sway the iron back and forth, until
all the water goes out of the water tank
(12).
•
Place the iron on the base and let it cool
down completely.
•
Once the soleplate (14) cools down com-
pletely, wipe it with a dry cloth.
•
Before you take the iron away for storage,
make sure that there is no water in the
water tank (12) and that iron soleplate (14)
is completely dry.
CLEANING AND CARE
•
Before cleaning the iron, make sure that it
is unplugged and has cooled down com-
pletely.
•
Clean the unit body with a damp cloth and
then wipe dry.
•
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solu-
tion.
•
After removing scale, polish the soleplate
surface with a dry cloth.
•
Do not use abrasive substances to clean
the iron soleplate and body.
•
Avoid contact of iron soleplate with sharp
metal objects.
STORAGE
•
Set the temperature control knob (10) to
the “MIN” position and the continuous
steam supply knob (3) to the position «
» (steam supply is off).
•
Unplug the unit.
•
Open the water inlet lid (2), turn over the
iron and drain any remaining water from the
water tank (12). Close the lid (2).
•
Put the iron vertically and let it cool down
completely.
•
Wind the power cord.
•
Store the iron vertically in a dry cool place,
out of the reach of children.
Delivery set
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50/60 Hz
Power consumption: 2000–2400 W
The manufacturer preserves the right to
change design and specifications of the unit
without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 2004/108/EC
and to the Law Voltage Regulation
2006/95/EC
MW-3035.indd 14 18.11.2013 16:17:42