Maxwell CAPSTAN 8000 Series, Manual

Page: 13 / 27

11
Anti-Seize Coating

International Paints Res-Q-Steel
Never mix greases, use only one type. If in doubt,
remove the previous lubricant and clean the parts
thoroughly before applying the new one.
4.3 SPARE PARTS

Maxwell recommends a modest quantity of spare
parts to be ordered as familiarity with the capstan is
developed during installation. As small parts can be
lost during maintenance, keeping spares (and spare
tools) is recommended.
We recommend the following list of spare parts per
capstan to be carried on board:
Part No.
Description Qty
P104751 Kit_ SS Cap (Ø80) and O-Ring
Includes:
4809 Cap 1
SP2769 O-Ring 1
2689 Retaining clip 2
3005 Drum key 1
If any other spare part is required, please refer to
Appendix B for the correct part number and contact
one of our distributors worldwide (Appendix D).
When ordering spare parts, please quote:

Capstan model


Serial number of the capstan

Part number (see Appendix B)

Part description

Quantity required
4.4 TOOLS FOR MAINTENANCE

We recommend the following tools be kept on board
for disassembling and assembling the capstan:

Set of metric hexagon keys (Allan keys),
sizes 8 and 10mm

Ring / open end spanner 17, 19 and 24mm

Flat screwdriver 10mm blade width

C irclip pliers