Maxtor MaXLine II 250 Product Manual Download Page 3 | Manualshive

Page: 3 / 50

background image

Before You Begin

Thank you for your interest in Maxtor hard disk drives. This manual provides technical infor-
mation for OEM engineers and systems integrators regarding the installation and use of
Maxtor hard drives. Drive repair should be performed only at an authorized repair center. For
repair information, contact the Maxtor Product Support Center at 1-800-2MAXTOR.

CAUTION

: Maxtor hard drives are precision products. Failure to follow these precautions

and guidelines outlined here may lead to product failure, damage and invalidation
of all warranties.

1

BEFORE

unpacking or handling a drive, take all proper electro-static discharge

(ESD) precautions, including personnel and equipment grounding. Stand-alone
drives are sensitive to ESD damage.

2

BEFORE

removing drives from their packing material, allow them to reach room

temperature.

3 During handling,

NEVER

drop, jar, or bump a drive.

4 Once a drive is removed from the Maxtor shipping container,

IMMEDIATELY

secure the drive through its mounting holes within a chassis. Otherwise, store
the drive on a padded, grounded, antistatic surface.

5

NEVER

switch DC power onto the drive by plugging an electrically live DC source

cable into the drive's connector.

NEVER

connect a live bus to the drive's inter-

face connector.

6

ELECTRICAL GROUNDING

-

For proper operation, the drive must be securely fas-

tened to a device bay that provides a suitable electrical ground to the drive base-
plate.

Please do not remove or cover up Maxtor factory-installed drive labels. They contain infor-
mation required should the drive ever need repair.Thank you for your interest in Maxtor hard
disk drives. This manual provides technical information for OEM engineers and systems inte-
grators regarding the installation and use of Maxtor hard drives. Drive repair should be per-
formed only at an authorized repair center. For repair information, contact the Maxtor
Customer Service Center at 800-2MAXTOR or 1-303-678-2015.

Corporate Headquarters:

500 McCarthy Blvd.

Milpitas, California 95035

Tel: 408-894-5000

Fax: 408-362-4740

«
1
2
3
4
5
...
»

Summary of Contents for MaXLine II 250



















































Reviews:

No comments

Related manuals for MaXLine II 250

Brand: Campbell Pages: 46

StorVize V7000 Gen2

Brand: IBM Pages: 188

Brand: Muscle Rack Pages: 2

Brand: Buffalo Pages: 2

Brand: U-Line Pages: 15

Brand: Rocstor Pages: 132

MaxAttach NAS 4000

Brand: Maxtor Pages: 2

Brand: OYEN DIGITAL Pages: 1

Brand: morse Pages: 7

Brand: Asus Pages: 32

Brand: Asus Pages: 40

Brand: Asus Pages: 58

Brand: Asus Pages: 10

Brand: Asus Pages: 8

Leather External HDD USB 3.0

Brand: Asus Pages: 2

Brand: Asus Pages: 14

Brand: Asus Pages: 21

AN200 External HDD

Brand: Asus Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands