background image

Product Specifications

Maxtor MaXLine II 250/300GB

3-8

3.10

Reliability Specifications

Annualized Return Rate

<1.0%

Annualized Return Rate (ARR) indicates the average against 

products shipped. 

Start/Stop Cycles

>50,000

This indicates the average minimum cycles for reliable start/

stop function.

R=0.9998@ >4500, R=0.9995 @ >7500, R=0.5 @ >= 50000

Data Reliability

<1 per 10e15 bits read

Data errors (non-recoverable). Average data error rate 

allowed with all error recovery features activated.

Component Design Life

5 years 

(minimum)

Component design life is defined as a.) the time period 

before identified wear-out mechanisms impact the failure 

rate, or b.) the time period up to the wear-out point when 

useful component life expires.

3.11

EMC/EMI

3.11.1

Radiated Electromagnetic Field Emissions - EMC Compliance

The hard disk drive mechanism is designed as a subassembly for 

installation into a suitable enclosure and is therefore not subject to 

Subpart J of Part 15 of FCC Rules (47CFR15) or the Canadian 

Department of Communications Radio Interference Regulations. 

Although not required, the disk mechanism has been tested within a 

suitable end-use product and found to comply with Class B limits of the 

FCC Rules and Regulations of the Canadian Department of 

Communications.

The CE Marking indicates conformity with the European Union Low 

Voltage Directive (73/23/EEC) when the disk mechanism is installed in 

a typical personal computer. Maxtor recommends that testing and 

analysis for EMC compliance be performed with the disk mechanism 

installed within the user's end-use application.

3.11.2

Canadian Emissions Statement

This digital apparatus does not exceed the Class B limits for radio noise 

emissions from digital apparatus as set out in the radio interference 

regulations of the Canadian department of communications.

Summary of Contents for MaXLine II 250



















































Reviews: