Ultra ATA/100 PCI Adapter Card
B
B
A
A
C K
C K
F O R
F O R
W
W
A R D
A R D
Hard Drive Installation
(cont.)
2. Install the hard drives in the proper hard drive
bays of your system.
3. Attach the UDMA IDE cable to the hard drives
and to the IDE connectors on the Ultra ATA/100
PCI Adapter Card.
If you're installing the adapter on a system with
Windows NT already installed, see the NOTE
above for more information.
The colored edge of the cable indicates pin 1
(Figure 3).The blue cable connector must be
attached to IDE 1 on the Ultra ATA/100 PCI
Adapter Card.
4. If two drives are connected via the same cable,
make sure that one drive is configured as a mas-
ter drive and connected to the back connector
of the UDMA interface cable.
Figure 3
UDMA Interface Cable
(industry standard cable length - 18 inches)
Adapter Connector (blue)
Drive 0 - Master (black)
Striped Edge (Pin 1)
Drive 1 - Slave (gray)
