Ultra ATA/100 PCI Adapter Card
B
B
A
A
C K
C K
F O R
F O R
W
W
A R D
A R D
Hard drives should not be connected to the Ultra
ATA/100 Adapter Card before performing the
following procedure.
The Ultra ATA/100 Drivers must be loaded on the
system hard drive (running under the existing hard
drive adapter) before any hard drives are connected
to the Ultra ATA/100 PCI Adapter Card.
NOTE: Please refer to screen capture pictures listed
in Steps 7, 8, 9 and 11 of Option A - as they also
apply for the steps outlined here in Option D.
1. Select “Settings” from “Start” menu.
2. Select “Control Panel” from the “Settings”
menu.
3. Double-click on the “SCSI Adapters” icon,
which generates the “SCSI Adapters” dialog
box.
4. Choose “Drivers,” and press “Add.”
Option D:
Installing Drivers with a Pre-Existing Windows NT 4.0/2000
5. In the “Install Drivers” dialog box, press
“Have Disk.”
6. When “Install From Disk” appears, insert the
“Ultra ATA/100 Driver” diskette in drive A:,
and select “OK.”
7. When the “Install Driver” dialog box appears,
select “Maxtor Ultra ATA/100 Adapter” and
press “OK.”
8. When the “Select SCSI Adapter Option” box
appears, press “Install.”
9. After a successful installation, the SCSI Adapter
Setup box will show that the Maxtor Ultra
ATA/100 Adapter driver was installed.
Power off your system and attach the hard
drive(s) to the Ultra ATA/100 PCI Adapter
Card.
