Ultra ATA/100 PCI Adapter Card
B
B
A
A
C K
C K
F O R
F O R
W
W
A R D
A R D
1. After installing the Ultra ATA/100 PCI Adapter
Card and configuring the hard drives, power up
the system and boot Windows.
2. The “Add New Hardware Wizard” will appear,
informing you that it has found a “PCI
Adapter.”
Refer to steps 3 through 9 of Option A for remain-
ing driver installation instructions.
Option B:
Installing Drivers with Pre-Existing Windows 98/ Millennium Installation
Driver Confirmation
To confirm that the driver has been properly
loaded, choose “Settings” from the "Start" menu.
Select “Control Panel,” and then double-click on
the “System” icon.
Choose the “Device Manager” tab, and then click
the “+” in front of “SCSI adapters.” “Maxtor Ultra
ATA/100 Adapter” should appear.
