background image

Ultra ATA/100  PCI Adapter  Card

B

B

A

A

C K

C K

F O R

F O R

W

W

A R D

A R D

PRODUCT WARRANTY

Maxtor’s warranty obligations are limited to the terms set forth: Maxtor warrants
only to the original consumer purchaser that new Maxtor Ultra ATA/100 PCI
Adapter Card products will be free from defects in material and workmanship for
1 year from the date of original purchase.

For a replacement Ultra ATA/100 PCI Adapter Card, the warranty on the replace-
ment card is the remainder of the warranty on the original card or 90 days, whichev-
er is longer. If you discover a defect, Maxtor will replace the Card at no charge to
you, provided you return it during the warranty period, with transportation charges
prepaid, to Maxtor in Ireland, Singapore or the USA.

Ultra ATA/100 PCI Adapter Cards must be properly packaged in Maxtor packaging
or Maxtor approved packaging to obtain warranty service. Before returning a
Maxtor Adapter, please contact Maxtor at 1-800-2MAXTOR (in USA) to obtain a
Return Material Authorization (RMA) number. A copy of the receipt or a bill of
sale bearing the appropriate Maxtor serial number and model number may be
required for warranty service.The warranty applies only to the Maxtor Ultra
ATA/100 PCI Adapter Cards that can be identified by the Maxtor trademark, trade
name, serial number or logo affixed to them. Maxtor does not warrant any Card that
is not manufactured by, for or with permission from Maxtor.

This warranty is not applicable to: Abnormal wear and tear; Abuse, unreasonable use,
mistreatment, or neglect; Damage caused during installation of the Card; Damage
caused by the equipment or system with which the Card is used; Damage caused by
modification or repair not made or authorized by Maxtor; Cards whose Maxtor
Serial Number has been removed or defaced; Damage caused by use of non-Maxtor
packaging; Damage caused by improper or improperly used packaging; Damage
caused by lack of ESD protection; Cards that are determined to be stolen.

THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLU-
SIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN,
EXPRESSED OR IMPLIED. MAXTOR SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING,WITHOUT LIMITA-
TION,WARRANTIES OF  MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE AND AGAINST INFRINGEMENT. No Maxtor
dealer, agent or employee is authorized to make any modification, extension or
addition to this warranty.

MAXTOR IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, INDI-
RECT OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY
BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED TO LOSS OF DATA, LOSS PROFITS,
DOWNTIME, GOODWILL, DAMAGE OR REPLACEMENT OF EQUIP-
MENT AND PROPERTY, AND ANY COSTS OF RECOVERING, PRO-
GRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED
IN OR USED WITH MAXTOR DISK DRIVES OR MAXTOR’S ULTRA
ATA/100 PCI ADAPTER CARDS.

Some states/jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or exclusions of implied warranties, so the above limitations
or exclusions may not apply to you.This warranty gives you specific legal rights,
and you may also have other rights that vary from jurisdiction to jurisdiction.

Summary of Contents for Basics ATA/100





















Reviews: