Maxtec SHOCKBLAZE, Use And Instruction Book, Page: 6 / 42

44
Use and instructions book
SADDLE POSITION
When riding the big toes have
to lean on the centre of the
pedal.
When the pedal is nearest to
the ground your knee has to
be lightly bended.
Straddle the saddle, lean your
heel on the pedal and move
nearest to the ground. In this
way your leg will be complete-
ly stretched (fig. 1).
If your tiptoes do not reach
the ground you have to lower
the saddle again.
When the saddle is adjusted,
you have to adequately tighten
the seat post release (with 13
Nm) and the saddle (with
20/24 Nm) (fig. 2).
WARNING/IMPORTANT:
The seat post has to be inserted
into the frame tube at least 75
mm and in any case the limit
mark that indicates the max
height limit has never to be
visible (fig. 3).
HANDLEBAR POSITION
You can adapt the height of
the handlebar loosening the
screw that is positioned over
the stem (fig. 4).
When you reach the correct
height, you have to tighten
again the screw keeping the
Fig. 1
Fig. 2
Fig. 3
Fig. 4
LIBRETTO_Layout 1 25/10/10 18:44 Pagina 44