Maxtec SHOCKBLAZE, Use And Instruction Book, Page: 13 / 42

brake pads has to be adjusted 0,2-0,4 mm working on the
relevant screws.
The hydraulic brakes are adjusted automatically.
WARNING/IMPORTANT:
For the best performance the brake pads have to reach the
minimum wear.
Do not touch the discs when you stop as they overheat
when working.
It is fundamental to repair immediately the brake system if
broken, one brake only is not enough for a safety brake
performance.
Particularly you have to check frequently slides, pads and
cables. Also check if they are well greased. Replace them
immediately if they show frayed or lengthened spirals, they
are curved at the ends, rusty or worn.
To replace the pads you have to release the closing bolt,
remove the pad and replace it.
Check that the pads are well fixed (with 5/8 Nm).
FRONT/REAR DERAILLEUR
With the front and rear derailleur you can choose the gear
you prefer and keep a regular and optimal rhythm in every
route, according to your physical conditions and training.
ENGLISH
51
Fig. 11
Tension
regulation
screw recovery
spring
Tension
regulation
screw recovery
spring
LIBRETTO_Layout 1 25/10/10 18:44 Pagina 51