12
Chapter 2 General Safety Information
5
、
The equipment does not have any part which can be maintained by
operators, and all the maintenance operations must be finished by the
professionals of Maxphotonics Co., Ltd.
6
、
To prevent electrical shock, do not remove enclosure, detach the laser
without permission and damage the relevant signs. Any product with
unauthorized dismounting shall not be subject to warranty.
WARNING:
◎
The input voltage of the laser is triple-phase AC current (360-440VAC), which
may cause risk of electric shock. All the relevant cables and connection wires
have potential hazards.
5
、
Environment Conditions and Precautions
For ensuring the safety of the laser working area, suitable enclosures shall
be applied, including but not limited the laser safety signs and the interlocking
devices. Corresponding operators must be trained and examined and know the
normal safety specifications for operating the laser.
Meanwhile, it is important that the output components shall not be installed at
eye level.
Because of interaction of the laser and the metal material, the radiation of high-
level ultraviolet light or visible light may be produced. Make sure that the laser
is provided with the protective cover to prevent the eyes or other parts of human
bodies from damage by radiation.
We recommend that you comply with the following operating measures to
prolong the service life of the laser:
1
、
Do not expose the laser to a high moisture environment.
2
、
Operation at higher temperature will accelerate aging, increase threshold
current and lower slop efficiency. If the device is overheated, stop operations
