manualshive.com logo in svg

Maxon TP-4800 series, Operating Instruction

Share
Download
Maxon TP-4800 series Operating Instruction Download Page 34

Display Messages

RANGE: This message accompanied by an intercept tone
(a "warbling" siren-type tone) indicates that the TP-4800
Series radio is Out Of Range, or too far from System site
to provide communications.

BUSY: Indicates that the channel is busy. This message is
accompanied by the intercept tone.

TX Time: This message indicates that the transmit Time-
Out-Time has been exceeded. This message is accompanied
by the intercept tone.

TX DSBL: Transmit is disabled, allowing only reception
of signals. This message will be displayed and the warbling
intercept tone will sound. (Dealer programmed).

TX INHIB: Indicates that the frequency or Group selected
is temporarily busy. This message is accompanied by the
intercept tone. Try your transmission again in 15 to 30
seconds.

UNLOCK: This message indicates that the synthesizer has
become "unlocked". If  this message should be displayed,
take the radio to your Maxon Dealer for service.

RX PRI: Indicates that a call has been received on a pro-
grammed priority channel. (Dealer programmed).

IN SCAN: Indicates that the Scan function has been
enabled.

30

Summary of Contents for TP-4800 series











































Reviews:

No comments

Brands by name

Popular brands

Load more brands