manualshive.com logo in svg

Maxon TP-4800 series, Operating Instruction

Share
Download
Maxon TP-4800 series Operating Instruction Download Page 15

Display Information

Alpha-numeric Display - In the standard mode, this
7-character display identifies the selected System/Group
and those operating modes or error conditions as described
in "Display Messages". In the "Phone" mode, it indicates the
telephone number as well as the functions activated in
"Phone" mode (Model TP-4800 only).

SYS (System)

-Displays above the System number

GRP (Group)

-Displays above the Group number

LOCK

-Indicates that the Keypad is disabled or
   that System (or Systems) are locked out
   of the scan sequence

MONITOR

-Indicates that the "Monitor" mode has
   been enabled by pressing the M Monitor

                button in a Conventional System

PHONE

-Indicates that the "Phone" mode has been
    selected (Model TP-4800 only)

FASS

-Indicates First Available System Scan has
     been enabled

SCAN

-Indicates that the "Scan" mode has been
   selected by the SCN key

CALL

-Indicates that a call has been received

BUSY

-Indicates that the channel (Conventional )
    or the System/Group (Trunked) you have

                 selected is busy

11

Summary of Contents for TP-4800 series











































Reviews:

No comments

Brands by name

Popular brands

Load more brands