manualshive.com logo in svg

Maxon TP-4800 series, Operating Instruction

Share
Download
Maxon TP-4800 series Operating Instruction Download Page 27

23

portion of the display and that System will be deleted from
the scan list.  When System Scan is initiated, the word
"LOCK" will be shown in the upper left portion of the
display along with the words

 

"IN SCAN" denoting a

System or Systems have been locked out of scan. To restore
a System to the scan list manually select the "LOCKed"
System and press the LCK key. The word "LOCK" will
disappear and the System will now be scanned while in the
System Scan Mode. The "LOCK" information is stored in
memory and will not be affected by turning the power switch
off.

Group Scan

There are two different ways the TP-4800 Series does
Group Scanning. Your Maxon Dealer programs these
functions into the radio during initial setup. Only those
Groups your Dealer has 

“

enabled

”

 for Group Scan can

be scanned. Group scan is not available in Conventional
Systems.

Auto Group Scan

There is no action required to initiate Auto Group Scan.
Whenever a System is selected that is programmed for Auto
Group Scan, those Groups "enabled" will automatically be
scanned. When an incoming call on any "enabled" Group is
detected, the radio will switch to this Group, display the
 Group number, and unique identifier. The radio will remain
on this Group until a message comes from another "enabled"
group, the SYStem key, and / or the GRouP key is pressed.

Summary of Contents for TP-4800 series











































Reviews:

No comments

Brands by name

Popular brands

Load more brands