Additional Telephone Calling Information
Entering Telephone Numbers
(Model TP-4800 only)
A. Press the PHONE key to enter the "Phone" mode.
The word "PHONE" will appear in the upper
right portion of the display. The numeric DTMF
telephone keypad is now enabled.
B. Enter the desired telephone number by pressing the
corresponding number keys.
The Maxon TP-4800 allows you to enter the telephone
number at any desired rate. Errors can be corrected before
sending the telephone number to be dialed. Numbers up to
14 digits in length can be entered. When there are more than
7 digits entered, the overflow icon will appear in the
lower left portion of the LCD display, next to the Group
number. Numbers which have been stored into memory
locations 1 through 8 and recalled will momentarily display
the first overflow digits, and then the last 7 digits entered.
Clearing Telephone Numbers
(Model TP-4800 only)
When a phone number has been entered, it will remain in the
display whenever you enter "Phone" mode. To erase the last
digit entered depress the CLR key. To erase the entire
number, press CLR until no information is displayed (CLR,
CLR, CLR, etc.).
Tip: To quickly erase an entire number from the display,
press "RECall" and the "0" (zero) memory location. It is a
dedicated "blank" display.
20
!
