1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
54
STEP 12 - ADJUST PLATFORM (IF REQUIRED)
- Continued
3.
Make sure platform is still at ground
level. If the tip of
fl
ipover is not touching
the ground, measure and compare dis-
tance
“B”
(FIG. 54-1)
with
TABLE 54-1
to determine how much to grind from
the platform stops
(FIG. 54-3)
.
TABLE 54-1
LOWER TIP OF
FLIPOVER
THIS DISTANCE “B”
GRIND METAL FROM
PLATFORM STOP
7/8”
1/16”
2”
1/8”
3”
3/16”
3-15/16”
1/4”
PLATFORM DOES NOT
TOUCH GROUND
FIG. 54-1
4.
RAISE
the platform to comfortable work
height. Fold
fl
ipover and platform for access
to platform stops
(FIG. 54-2)
.
GRINDING PLATFORM STOPS
(CURBSIDE SHOWN)
FIG. 54-3
TIP OF
FLIPOVER
“B”
(TABLE 54-1)
PLATFORM
STOP
GRIND HERE
(TABLE 54-1)
6.
Unfold
fl
ipover and platform.
LOWER
plat-
form to the ground. As the platform
fi
rst
touches the ground, the tip of
fl
ipover and
shackle should touch at the same time as
shown in
FIG. 54-1
.
5.
Grind correct amount of metal
(TABLE 54-1)
from platform stop as shown in
FIG. 54-3
.
PLATFORM RAISED TO WORK HEIGHT
FIG. 54-2
Summary of Contents for TE-25DC
Page 78: ......
