1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
10
1.
Check for correct clearances
(FIGS. 10-1, 11-1, and 11-2)
on
vehicle to prevent interference between vehicle and Liftgate.
VEHICLE REQUIREMENTS
NOTE:
Make sure vehicle is parked on level ground while preparing vehicle and
installing Liftgate.
NOTE:
Dimensions are provided as reference for
fi
tting Liftgate to vehicle body.
NOTE: Maximum and Minimum Operating Bed Height for Standard Platforms:
• Maximum bed height for TE-25DC & TE-33 Liftgates on high bed vehicles is
54”
(unloaded). Minimum bed height is
42”
(loaded).
• Maximum bed height for TE-25DC & TE-33 Liftgates on low bed vehicles is
44”
(unloaded). Minimum bed height varies with platform depth. See
TE-25DC & TE-33
LOW BED CLEARANCES
,
FIG. 11-1
.
• Maximum bed height for TEWR-25 & TEWR-33 walk ramp Liftgates is
54”
(un-
loaded). Minimum bed height varies with platform depth. See
TEWR-25DC &
TEWR-33 CLEARANCES
,
FIG. 11-2
.
If swing door latches interfere with
fi
t of extension plate, do not install this Liftgate
on vehicle bodies equipped with
swing open doors
.
TE-25DC & TE-33 HIGH BED CLEARANCES
(54” TO 42” BED HEIGHT)
FIG. 10-1
54” MAX BED HEIGHT
42” MIN BED HEIGHT
13”
22-1/8”
23-1/2” TO 11-1/2”
32-11/16”
24-1/2”
12-5/8”
Summary of Contents for TE-25DC
Page 78: ......
