1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
40
STEP 6 - CONNECT GROUND CABLE
PUMP MOUNTING
BRACKET
CONNECTING EXTERNAL GROUND CABLE
FIG. 40-1
PUMP GROUND
CABLE
CAP
SCREW,
5/16” LG.
NOTE:
To ensure power unit is correctly grounded, connect 2 gauge ground cable
from grounding connection on pump mounting plate to a grounding point on
the frame, or negative battery terminal in the optional battery box.
1.
Unbolt pump ground cable from the
pump mounting bracket. Then, bolt and
tighten pump ground cable and external
ground cable (parts box) to mounting
bracket
(FIG. 40-1)
.
TERMINAL LUG
TERMINAL LUG
(EXTERNAL GROUND
(EXTERNAL GROUND
CABLE)
CABLE)
NOTE:
If there is a grounding point on the frame,
use it to connect ground cable. Then, skip
the step for drilling a hole.
2.
Extend the ground cable to reach
vehicle frame
(FIG. 40-2)
without
putting tension on cable (after con-
nection). Connect to an existing
grounding point if available.
5.
Bolt both ends of the ground
cable terminal lug as shown in
FIGS. 40-1 & 40-2
.
NOTE:
Clean the ground cable connection point
on the frame down to bare metal.
3.
If necessary, drill a 11/32” (0.343”)
hole in vehicle frame for bolting
the ground cable terminal lug
(FIG. 40-2)
.
FIG. 40-2
TERMINAL LUG
(GROUND CABLE)
5/16"-18 X 1" LG
CAP SCREW
5/16” FLAT
WASHER
5/16”-18
LOCK NUT
VEHICLE CHASSIS
(TRUCK FRAME SHOWN)
BARE
METAL
4.
To prevent corrosion
,
paint or
use galvanized spray on bare
metal area
FIG. 40-2
.
Summary of Contents for TE-25DC
Page 78: ......
