Commissioning
Final Checks prior Commissioning
IDX 56 User Manual
5-46
mmag | 2020-04 | rel9398
5.2
Final Checks prior Commissioning
Check below listed items and make sure that all operative conditions are met before you commence with
any commissioning task.
MECHANICAL
1)
Make sure that you have worked your way through the entire chapter
and that you have completed all described tasks.
2)
Make sure that the drive is correctly mounted and aligned as specified.
3)
Make sure that all driven elements of the surrounding system can move freely and that they are set
and ready for operation.
ELECTRICAL
4)
Make sure that you have worked your way through the entire chapter
and that you have completed all described tasks.
5)
Make sure that electrical connections and electrical grounding are setup as specified.
6)
Make sure that all junction boxes are properly closed and safe against unintentional contact.
FUNCTION
7)
Remove mechanical interlocks, deadlocks, or other locking mechanisms, if any.
8)
Make sure that the IDX drive and the attached system can freely move without being mechanically
blocked.
9)
Make sure that all protection systems and safety guards are in place and ready for operation.
10) Inform any person standing nearby on the possible automatic start-up of the system and make
them stay clear.
11) Remove locks and tags (if any) as to any applicable lock-out/tag-out procedures. Release all power
engaging equipment that you have locked against unintentional engagement.
12) Check for proper function of all involved elements of the surrounding system. Do not continue
unless the surrounding system fully complies with its operative conditions.
Compliance of operative conditions of the surrounding system
Do not continue unless the surrounding system fully complies with its operative conditions and fulfills all
requirements asked for in its operating license.
5.3
Parameterization and Programming
1)
To set the IDX drive for service, you will need to install the «EPOS Studio» on your PC. You may
download the software and a comprehensive documentation set free of charge (find sources here:
chapter “1.2 About the Devices” on page 1-8).
2)
For setup, parameterization, programming, and testing of the drive, follow the descriptions given in
the «EPOS Studio» Online Help.
