maxon motor
EPOS 24/5 Getting Started
EPOS Positioning Controller
e)
Now, auto-tuning will start. It is searching suitable regulation gains
for current regulation mode automatically. This procedure can take
a few minutes. All tuning steps will be displayed for further
analysis.
Figure 30: Confirm end of tuning
f)
Confirm the end of tuning by clicking on ‘No’ button.
g)
If an error occurs and the auto-tuning will not start, please confirm
and clear the error. Next adjust the starting parameters by referring
to chapter
. Afterwards start the auto-tuning
again.
Figure 31: Confirm tuning error
Figure 32: Clear tuning error
December 2008 Edition / document number 573050-07 / subject to change
maxon motor control
23
