❐
Always move the On/Off switch
fi
rst to the
OFF
position before you move the function
switch to
EXT
or
MIX
. The function switches must not be switched over while the
kneading spiral is still rotating!
❐
Always assemble the device in full before you connect it to the mains power.
You will
fi
nd details about quantities of ingredients following the "Troubleshooting"
chapter in the "Basic Recipe for Pasta Dough" chapter.
Set-up and Connection
1. Place the device on a level, stable and non-slip surface.
2. Carry out steps 1-9 in the "Assembly" chapter.
3. Make sure that the On/Off switch is in the
OFF
position
before you connect the device to a proper plug socket.
Operation
1. First of all, you should only pour dry ingredients such as
fl
our and herbs into the mixing
container (liquid will not be added until later).
2. Place the mixing container lid on the mixing container (see the "Assembly" chapter, steps
10-12).
3. Move the round function switch to the
MIX
(mixing/knead-
ing) position.
4. Move the square On/Off switch to the
MIX
(mixing/knead-
ing) position to start the kneading process.
