3. Push the kneading spiral onto the drive shaft of the dough
screw conveyor.
The kneading spiral can only be pushed onto the drive shaft if
the feather key in the opening of the kneading spiral extends
into the groove on the drive shaft.
4. Now push the drive shaft of the dough screw conveyor with
the kneading spiral through the round dough outlet opening
in the mixing container.
5. Insert the drive shaft into the pentagonal opening of the mo-
tor unit.
6. Push the connecting piece up to the limit stop into the
round dough outlet opening of the mixing container. On the
connecting piece there is a circular mark (shown in black on
the picture). Make sure when inserting the connecting piece
that the circular mark on the connecting piece is opposite
the circular mark on the mixing container.
7. Turn the connecting piece clockwise (in the direction of the
arrow marked on the mixing container) so that the circular
mark on the connecting piece is opposite the lower circular
mark on the mixing container. The bayonet closure is now
locked shut.
8. Place a pasta attachment of your choice onto the dough
outlet opening on the connecting piece.
9. Place the locking ring onto the pasta attachment and screw it
clockwise to tighten it.
10. Place the mixing container lid onto the mixing container in
such a way that the tab on the back part of the lid
fi
ts into
the recess on the motor unit.
