MAXINCOM MWG1002 User Manual Download Page 52 | Manualshive

Page: 52 / 55

MAXINCOM MWG1002 User Manual Download Page 52

MWG1000 Series User Manual

Http://www.maxincom.com

52 / 55

Figure 3.12.3

Click 'Backup' to download configuration file to your computer.

Notes:

1. Only configurations, custom prompts will be backed up.
2. When you have updated the firmware version, it’s not recommended to
restore using old package.

3.12.4 Data restore

You can restore this configuration in case the unit loses it for any reason or to
clone a unit with the configuration of another unit. The configuration backup

configurations are in txt format. Please note that you can use a backup file
from an older firmware version and use it in a unit with a more recent
firmware version. However, a backup file from a newer firmware version than
the one actually in the unit cannot be used for a restore operation on the unit.

Notes:
1. The upload process will last about 30s.
2. When you have updated the firmware version, it’s not recommended to
restore using old package.

Figure 3.12.4

3.12.5 Voice Prompt Management

By default, when PSTN call incoming, the system will play the default IVR,
and also the user can load custom IVR.

«
...
50
51
52
53
54
...
»

Summary of Contents for MWG1002
























































Reviews:

No comments