MWG1000 Series User Manual
Http://www.maxincom.com
27 / 55
Table 3-6-2 Description of IP ->Tel Routing
Parameters
Description
IP ->Tel
Routing
This item is used to configure outgoing call routes which
can be used for receive the calls from the IP side
Index
It uniquely identifies a route. Its value is assigned globally,
ranging from 0 to 31. The route preferentially match the
rules which the value of index is smaller. Index 31 is default
route on gateway which to be match all prefixes.
Description
It describes the route for the ease of identification. Its
value is character string.
Source
It specifies the IP of the caller.
Source Prefix
All the caller number must match the source prefix.
It specifies the source prefix allow to send call out
●
Any: include anonymous,0XXXX,1[2-9]XXXX etc.
●
X: Any digit from 0-9.
●
Z: Any digit from 1-9.
●
N: Any digit from 2-9.
●
[1235-9]: Any digit in the brackets (in this example,
1,2,3,5,6,7,8,9).
Example 1: NXXXXXX would match normal 7 digit dialings.
Example 2: 1[5-8]6:consist of some prefix, include
156,166,176,186.
Destination
Prefix
All the called number must match the destination prefix,
the call prefix indicates the connected number
●
Any: include anonymous,0XXXX,1[2-9]XXXX etc.
●
X: Any digit from 0-9.
●
Z: Any digit from 1-9.
●
N: Any digit from 2-9.
●
[1235-9]: Any digit in the brackets (in this example,
1,2,3,5,6,7,8,9).