MWG1000 Series User Manual
Http://www.maxincom.com
51 / 55
Factory reset
Reset Configuration to Factory Defaults
Browse
Choose File
3.12.2 SMTP Setting
To send the SMS or system alert to email address, please configure the Email
settings first, and make sure SMTP test is successful.
Figure 3.12.2
Table 3.12.2
Parameters
Description
E-mail Address
The E-mail Address that MWG1004 will use to send
voice mail.
Password
The password for the email address used above
SMTP Server
The IP address or hostname of an SMTP server that the
MWG1004 will connect to in order to send voice mail
messages via email, i.e.mail.yourcompany.com.
SSL
If the server of sending email needs to authenticate the
sender, you need to enable this.
Note: Must be selected for Gmail or exchange server.
Port
SMTP Port: the default value is 25.
Use SSL/TLS to
send secure
message to server
If the server of sending email needs to authenticate the
sender, you need to enable this.
Note: Must be selected for Gmail or exchange server.
3.12.3 Data backup
We can backup up the configurations before reset MWG1004 to factory
defaults