MWG1000 Series User Manual
Http://www.maxincom.com
35 / 55
3.7.3 Tel->IP source numbers manipulation
Figure 3-7-3 Tel->IP source numbers manipulation
Table 3-7-3 Description of Tel->IP source numbers manipulation
Parameters
Description
Index
It uniquely identifies a route. Its value is assigned globally,
ranging from 0 to 31 .
Description
It describes the route for the ease of identification. Its
value is character string.
Source
It specifies the source port or port group which will send
the calls to gateway
Source Prefix
All the caller number must match the source prefix.
It specifies the source prefix allow to send call out
●
Any: include anonymous,0XXXX,1[2-9]XXXX etc.
●
X: Any digit from 0-9.
●
Z: Any digit from 1-9.
●
N: Any digit from 2-9.
●
[1235-9]: Any digit in the brackets (in this example,
1,2,3,5,6,7,8,9).
Example 1: NXXXXXX would match normal 7 digit dialings.
Example 2: 1[5-8]6:consist of some prefix, include
156,166,176,186.
Destination
Prefix
All the called number must match the destination prefix,
the call prefix indicates the connected number
●
Any: include anonymous,0XXXX,1[2-9]XXXX etc.
●
X: Any digit from 0-9.
●
Z: Any digit from 1-9.
●
N: Any digit from 2-9.
●
[1235-9]: Any digit in the brackets (in this example,
1,2,3,5,6,7,8,9).
Example 1: NXXXXXX would match normal 7 digit dialings.
Example 2: 1[5-8]6:consist of some prefix, include
156,166,176,186.
Destination
Its specifies destinations: SIP Account, IPs , IP Group, SIP
Server
Stripped Digits
from Left
It specifies the length of the digits to be deleted from left
Stripped Digits
from Right
It specifies the length of the digits to be deleted from Right
Prefix to Add
Add the new digits in front of the original number
Suffix to Add
Add the new digits at the end of the original number